Punch Tools
Need to punch holes in materials such as leathers, rubber, paper, plastics, and other soft materials? WBC carries a full selection of punches and punch tool sets that are made from high quality materials from C.S. Osborne. These tool are made to last and will cut through material cleanly.
Sort By:
Show:
Revolving Punch
The Revolving Punch features six tubes sizes 0, 1, 2, 3, 5, & 7. The frame is constructed of forged steel and highly polished. Cutting tubes are turned from special carbon tool steel and threaded to allow easy replacement. These tubes are individually hardened. The reach or distance from the cutting tube to the bac..
Revolving Punch - Nickel Plated
The Nickel Plated Revolving Punch features a fine quality pressed frame with drive tubes. All tubes are heat treated to give long wear. Comes with tube sizes 0, 1, 2, 3, 4, and 6. The sizes of the tubes: Size 0 = 5/64", Size 1 = 3/32", Size 2 = 7/64", Size 3 = 1/8", Size 4 = 5/32", Size 6 = 3/16" Replacement tube..
Spring Punch - Zinc Plated
The Zinc Plated Spring Punch features a sturdy pressed steel punch with replaceable drive tubes. Comes with a non-removable anvil and the frame comes with a size 00 tube. Size 00 has a diameter hole of 1/16"...
Spring Punch - Zinc Plated #248
The #248 Spring Punch features a sturdy pressed steel frame with easily replaceable tubes. Compact, ruggedly constructed and fits any hand comfortably. Comes with either a Size 00 or Size 0 tube. Can fit tubes from sizes 00 to 4...
Arch Punch - Measurements in Inches
Arch punches are drop forged in one piece from the finest special carbon steel in sizes 1/8" to 2 1/8". Larger sizes are made with a properly engineered two piece welded construction. Features a unique inside taper which permits the punching to clear easily through the barrel. Punches have fully polished barrel. Cuttin..
Arch Punch - Measurements in Millimeters
Arch punches are drop forged in one piece from the finest special carbon steel in sizes 2mm to 54mm. Larger sizes are made with a properly engineered two piece welded construction. Features a unique inside taper which permits the punching to clear easily through the barrel. Punches have fully polished barrel. Cutting e..
Round or Drive Punch #147
The Round or Drive Punches are drop forged from the finest special carbon steel and carefully hardened. Features a polished barrel. The hole tapers back from the cutting edge so that the punched pieces clear freely and require only a light blow with a mallet. Available in 17 sizes. The sizing chart at the link b..
Belt Punch - Fractional Inch Sizes
The Belt Punch features a hardened cutting edge and milled clearing hole. Available in 22 fractional inch sizes. Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osborne wooden or rawhide mallet, or rawhide maul is recommended. Not recommended for u..
Belt Punch - Millimeter Measurements
The Belt Punch features a hardened cutting edge and milled clearing hole. Available in 19 sizes in millimeters. Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osborne wooden or rawhide mallet, or rawhide maul is recommended. Not recommended for us..
Self-Centering Punch Set
The Self-Centering Punch Set is handy and versatile. Features a threaded handle with self-centering pointed plunger. The handle will accommodate nine interchangeable threaded cutting tubes. Can cut through leather, rubber, paper, plastics, and other soft materials. The self-centering point makes these punches ideal for..
Strap End Punch #150
The Strap End Punch is great for making rounded strap ends on leather material. Features hardened and polished edges for long lasting durability. Comes in 15 sizes. Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osborne wooden or rawhide mallet,..
Strap End Punch - English Point #0150
Strap End Punch with an English Point style is great to shape ends of straps. Features hardened and polished edges and comes in 15 sizes. Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osborne wooden or rawhide mallet, or rawhide maul is recomme..
Oval Drive Punch #158
The Oval Drive Punch is made from the best grade of alloy steel, carefully tempered with polished edge. Features a hole that tapers back from the cutting edge so that punchings can clear freely. Comes in sizes 1 through 16.Size Chart below needs to be printed to see actual size: Sizing Chart for Oval Punches #158Use pu..
Pippin Punch (Round Punch) #105-1
Pippin Punch with round punch hole is drop forged and highly polished. Features hardened edges for long lasting durability.Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osborne wooden or rawhide mallet, or rawhide maul is recommended. Not recommen..
Pippin Punch (Oval Punch) #105-2
Pippin Punch features an oval hole punch that is drop forged and highly polished. The edges have been hardened for long lasting durability.Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osborne wooden or rawhide mallet, or rawhide maul is recommend..
Rosette Cutter #139
The Rosette Cutter features a circular punch scalloped cutting tool that is polished and has hardened edges for strength and durability. Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osborne wooden or rawhide mallet, or rawhide maul is recommen..
Strap End Punch #154
The Strap End Punch #154 features a rounded corner box shape cut and comes in 5 sizes. Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osborne wooden or rawhide mallet, or rawhide maul is recommended. Not recommended for use with a steel hammer...
Ventilator Punch #622
The Ventilator Punch is used to punch ventilator holes in leather, vinyl, and other materials with a specific hole pattern. Uses #248T-2 tubes. Overall Length: 5 1/4"Diameter of Hole: 3/32"Weight: 10ozUse punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C...
Oblong Punch #400
The Oblong Punch #400 features a polished barrel with hardened cutting edge. Hole tapers inside for easy punch clearings.Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osborne wooden or rawhide mallet, or rawhide maul is recommended. Not recommende..
Arch Punch Set K-14 - Millimeter Measurements
This set of seven arch punches includes the most popular millimeter sizes. They are put up in a sturdy, easy to use canvas tool roll as shown. Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osborne wooden or rawhide mallet, or rawhide maul is reco..
Arch Punch Set K-16 - Sixteenth Inch Sizes
This set of seven arch punches in sixteenth inch sizes are incremented by 1/8" starting with 3/16" to 15/16". They are put up in a sturdy, easy to use canvas tool roll as shown. Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osborne wooden or rawh..
Belt Punch Set K-245L
This Belt Punch Set has everything you need to punch belt holes in the most common larger sizes. Comes with 1 of each of the following sizes: 1/2", 9/16", 5/8", 3/4", 7/8" & 1". Set packed in a sturdy tool canvas roll. Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply..
Mini-Punch Set K-157
The Mini Punch Set is specialized for cutting small, precise holes in soft materials where throated or plier punches won't reach. Set features a round handle with slot inside to clear punchings. Handle is threaded to accommodate the seven replaceable screw tubes. Use punches on a wood or plastic cutting block or ..
Cutting Pad #CS603
The Cutting Pad is made of a special formula resilient vinyl plastic.  Great for use with all types of punch tools and the pads are strong and durable.  They can be used on both sides for long-lasting wearability.  Features a self-healing surface that absorbs cuts and helps prevent scars from for..
Multi-Use Strap End Punch
The Multi-Use Strap End Punch is great for punching out a clean tapered cut for the ends of belts and straps. Features a hardened and polished edge. Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osborne wooden or rawhide mallet, or rawhide mau..
Belt Punch Set K-245
The Belt Punch Set has everything you need to punch belt holes in a variety of sizes. Kit contains the most frequently used sizes. Comes with 1 of each of the following sizes: 2, 4, 6, 9, 12, 14. Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osb..
Arch Punch Set K-14 - Inch Measurements
This set of seven arch punches includes the sizes most widely used. They are put up in a sturdy, easy to use canvas tool roll as shown. Use punches on a wood or plastic cutting block or the C.S. Osborne # 603 Cutting Pad. To apply pressure, use of a C.S. Osborne wooden or rawhide mallet, or rawhide maul is recommended..
Arch Punch & Tool Set
Set of seven popular tools in a sturdy canvas tool roll.Included: (1 of each in each set) 1/4", 3/8", 1/2", 5/8", 3/4", 1" Arch Punches, Scratch Awl, and 7" Snips Weight: 4 lbs. per set..
Bag or Oblong Punch
Bag or Oblong Punches feature taper clearance, polished barrel, hardened and polished edges. Used extensively by leather bag and strap manufacturers. Sizing chart at link below must be printed to see in actual size: Oblong Punches Size Chart Use punches on a wood or plastic cutting block or the C.S. Osborne # 60..
Prick Punch
Forged from the finest quality high carbon steel. Hardened and tempered points for industrial use. Pointed ends are highly polished. Hexagon shanks in black industrial finish. Hex Stock Size: 5/16" Length: 4.5" Weight: 2 oz..
Solid Punch
Forged from the finest quality high carbon steel. Hardened and tempered points for industrial use. Pointed ends are highly polished. Hexagon shanks in black industrial finish. Point Diameter: 1/4"Hex Stock Size: 5/8"Length: 6.5"Weight: 8oz..
Showing 1 to 31 of 31 (1 Pages)
Categories