 Scored Pieces of Hook and Loop |
Scored Pieces Hook and loop backed with pressure-sensitive adhesive (PSA) can be scored for ideal in-house assembly—cut to specified lengths but left on the release liner, as shown in the top of the picture to the left. We use a rotary die cutter to make a precise cut at a specified length, without losing any material from the roll. Our machines are precisely calibrated to cut all the way through the material and adhesive without touching the Mylar release liner backing. All you'll have to do is peel a section of material off the roll—no more messing around with scraps of liner paper! |
 Kiss Cut Pieces of Hook and Loop |
"Kiss-Cut" Pieces Similarly, we can "kiss-cut" custom shapes out of PSA-backed hook and loop without cutting into the liner, as shown in the bottom of the picture. This is also done with our rotary die cutter, and we have a wide selection of shapes available for your project. The excess material is simultaneously taken off by our machine as it cuts, so all you're left with is a roll of clean, precise forms ready for your assembly team. |
Custom Fabrication:
Scored and Kiss-Cut Pieces
